Separated tracks on ableton – Model:Samples

If you want to play all the six tracks individually via midi from Ableton live, you first go to the project menu on the M:S, go to midi and under sync you set Clk in and Clk out to off (otherwise Ableton Live would start the pattern on the M:S when you press start in Ableton Live). Then under In Chan, you give each track its own midi channel. You can simply go with midi channel 1 for track 1, midi channel 2 for track 2 and so on if you don´t have any other synths connected to the same midi out from Ableton Live.
Under Ports you set Inp From to Mid if the M:S is connected via midi cable or to USB if you have it connected with an usb cable.
Under Filter RCV Note is set to on.

In Ableton Live you open the preferences and go to the Midi Sync tab. Make sure Track is active for the Model:Samples midi output.

Then you create six midi tracks in Live. In the dropdown menu you select for track 1 to output midi to the Model:Samples on midi channel 1, track 2 to output midi to the Model:Samples on midi channel 2 etc.

Create an audio track and select the correct input for the M:S.

If you want to record on two individual mono tracks, you create two audio tracks in Live. One tracks gets the left output, typical that´s input 1, the other tracks receives from the right output, that´s input 2.
Make sure you have selected 1 (mono)&2(mono) as well as the 1/2 stereo option in Ableton Lives preferences, audio tab, click input config.

Then on the M:S decide which tracks go to the left and which go to the right by panning them completely left or right.