1.3inch LCD Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, IPS Screen 240×240 Pixels RGB, 65K Display Color LED Backlight SPI Interface 3.3V Operating Voltage

Overview
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240×240 pixels, with embedded controller, communicating via SPI interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
IPS screen, wide viewing angle, better display
High definition in small size
1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)

Specifications
Operating voltage: 3.3V
Interface: SPI
LCD type: IPS
Controller: ST7789VM
Resolution: 240(H)RGB x 240(V)
Display size: 23.4（H）x 23.4（V）mm
Pixel size: 0.0975（H）x 0.0975（V）mm
Dimension: 65 x 30.2(mm)

User Manual/How to use: //bit.ly/3gcUJWw

LCD and the controller

The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 240 (H) RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn’t use all the RAM of the controller. This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565. This LCD use a 4-line SPI interface for reducing GPIO and fast speed.LCD.

Package Content
1.3inch LCD HAT x1
RPi screws pack (2pcs) x1