ET829 3 in 1 Oscilloscope Multimeter 80MHZ Channel Oscilloscope and Multimeter and Generator

Specification:

Item Type: Oscilloscope Multimeter

Screen: 320 x 240 resolution, 2.8in TFT color screen, 58 x 45mm / 2.28 x 1.77in (approx.).

Backlight Brightness: Adjustable

Backlight Time: 30s~120s, adjustable, and the screen will shut off automatically when there is no operation.

Battery: 2 x 2000mAh lithium ion battery, shipped with built in battery.

Automatic Shutdown: 15min~60min, adjustable, automatic shutdown in case of no operation.

Charging Interface: Type C

Service Time: About 10 Hours

Data Record: Record 2000 DMM data and 200 OSC waveforms.

Functions of Digital Storage Oscilloscope:

Analog Bandwidth: 80MHz

Maximum Real Time Sampling Rate: 200Msps

Vertical Direction: 8bit

Horizontal Square: ± 1bit

Channels: 2 Channels

Coupling Mode: DC, AC, GND

Input Impedance: About 1M ?

Index: 4.0 vertically, 6.0 horizontally.

Vertical Sensitivity Range: input BNC, 10mV/div~10V/div

Time Base Range: 5ns/div~50s/div, 1-2-5 steps

Accuracy of Vertical Amplitude: ± (5%+0.2div)

Time Base Accuracy: ± (0.01+0.1div)

Automatic 0 Reference: DC Measurement

Scanning Mode: Automatic, normal, single.

Trigger Level: ± 4div, 0.04div per level.

Trigger Slope Selection: Up, down, double.

Trigger Position Adjustment: ± 4di, 0.04div per stage.

Automatic Setting: Automatically set the time base and vertical amplitude.

Cursor Measurement Function: ?V, ?T.

Optional Bandwidth Limit: 20MHz, typical.

Voltage Measurement Parameters: Vp-p, Vp, Vmax, Vmin, Vavg, Vrms

Time Measurement Parameters: Frequency, period,+width, – width,+duty cycle, – duty cycle.

Automatic Measurement Accuracy: ± (5%+0.2div)

Record Length: 6K for single channel and 3K for dual channel.

source Features:

Waveform Frequency:

Positive : 1Hz-5MHz

Square : 10Hz~1MHz

Triangular : 10Hz~1MHz

Waveform Amplitude: 5Vpp, 3Vpp,